Page Comparison

...

Most of the time you will find your beacons automatically added to your database after purchase and installation. If you mistakenly deleted your beacon, you can manually add it back. You will need to have this deleted beacon, the nRF Connect app, or another for scanning Bluetooth devices, and a place without any beacons around you.

Get the

...

twinzo tBeacon MAC address

1. Take out the paper and remove a battery from the beacon you would like to add,

2. open the https://portal.twinzo.eu/#rtls/beacons page,

or paper for the beacon MAC address

onboard,

3. open your app for scanning Bluetooth devices and start scanning,

4. insert the battery into the beacon,

5. after a while, the beacon with the name INFOTECH or twinzo tBeacon CR should pop up with its own MAC address,

6. take note of the MAC address.

...

Adding the beacons to the portal

1. Open the https://portal.twinzo.eu/#rtls/beacons pageNavigate to your portal page,

2. open the Beacons page from the left side panel (navigate RTLS → Beacons),

3. click the PLUS button,

...

3. type the Beacon ID (located on the beacon motherboard or on the case),

...